ICA UPS ST-831C with a capacity of UPS 1600VA is working on-line to provide AC power voltage continuously on the load attached. The inverter only works when the input AC voltage low/missing/dead.
AC input voltage time under normal circumstances, this UPS will continuously set the input voltage AC filter & in order the supply voltage of the AC power to the load attached always stable clean power supply including & to charge the battery.
When the AC input voltage low/missing/dead, inverter will replace it with a fixed supply voltage AC power keeps a steady load on clean installed & with time than (transfer time) very shortly.
TECHNICAL SPECIFICATION:
-Model & Type: ST-831C/on-line SINEWAVE UPS
-Capacity: 1600 VA/800 W
-AC Input Voltage: 160V ~ 250V (single phase)
-AC Input Frequency: 50 Hz ± 3%
-AC Input Protection: 7 A
-DC Input Voltage: 48 V
-DC Input (Internal Battery): 4 x 12V/7Ah (SLA Battery)
-DC Input Protection: FUSE
-Charging Topology: Switching Regulation
-Floating Charging Voltage: 33.8 V
-INVERTER Output Wave Form: SINEWAVE
-INVERTER Output Distorsion:< 3%="" thd="" (load="">
-INVERTER Output Topology: Pulse Width Modulation (PWM)
-INVERTER Output Voltage: 220V ± 2% (single phase)
-INVERTER Output Frequency: 50 Hz ±1%
-INVERTER Output Efficiency: 85% > (at Full Load)
-Transfer Time When AC Inputs Fail: 0 ms (on-line)
-Transfer Time STS (Static Transfer Switch): 2 ms (Inverter <=>Bypass), Zero Crossing Bypass to Inverter
-Back Up Time: 10 min (at Nominal Load)
-BUZZER AC Input Low/Fail: INTERMITTENT SOUND WITH 4 SECONDS INTERVAL
-BUZZER Battery Low: INTERMITTENT SOUND WITH 1 SECONDS INTERVALS
-Operation Temperature: 0-40 ° C
-Dime